CX86500 - SCXV.92/V.34/V.32bis Modem / Controller-based Modem with Worldwide SmartDAA 3 Line Side Device for Embedded Applications - Conexant Systems, Inc
The Conexant? SCXV.92, SCXV.34, and SCXV.32bis modems are worldwide operational
modem device sets for embedded applications that support modulations up to V.92,
V.34, and V.32bis, respectively. All modems also support V.44/V.42bis/MNP 5 data
compression for greater data throughput, V.42 LAPM/MNP2-4 error correction protocol
for increased data integrity and reliability.
The SCXV.92/V.34/V.32bis device set consists of a modem device and a SmartDAA? 3
Line Side Device (LSD). The modem device integrates a microcontroller (MCU), a digital
signal processor (DSP), and a SmartDAA system side device (SSD) onto a single die
(Figure 1). The modem is available in 28-pin or 38-pin TSSOP versions. The 28-pin
version is for serial interface applications (Figure 2) and is footprint-compatible with the
CX84100 (SCXV.22bis) and CX81801-9x (SmartV.XX) modem devices. The 38-pin
version is for serial (Figure 3) or parallel (Figure 4) interface applications (interface type
selectable by an I/O pin). Major hardware interfaces are illustrated in Figure 1.
Conexant’s SmartDAA technology used in the SmartDAA 3 LSD eliminates the need for
bulky analog transformers, relays, and opto-isolators typically used in discrete DAA
implementations. The SmartDAA 3 LSD operates without drawing power from the phone
line, unlike line-powered DAAs, and is therefore not subject to variations in line voltage
conditions. The SmartDAA 3 LSD also adds enhanced telephony extension features to
the modem’s operation and other functions such as Call Waiting detection, and Caller ID
decoding. Incorporating Conexant’s proprietary Digital Isolation Barrier (DIB) design and
other innovative DAA features, the SmartDAA architecture simplifies application design
and minimizes layout area to reduce design cost. The SmartDAA 3 LSD is available in a
28-pin Quad Flat No-lead (QFN) package or in a 32-pin Low Profile Quad Pack (LQFP)
package.
The modem operates by executing masked code from internal ROM. The modem
features internal RAM memory that enhances the modem's flexibility. The modem's
internal RAM can be used to load new country profiles, override existing country profiles
or add customized firmware code. An optional external serial NVRAM is supported by
the 38-pin version. The optional external NVRAM adds the convenience of permanent
storage, just like internal RAM, NVRAM can be used to store new country profiles,
override existing ones or add customized firmware code.
Small, low-profile packages, reduced voltage operation, and low power consumption
make this device set an ideal solution for embedded applications
**注意 & Noted:
Because of wholesale price is different from sample price, our website cannot state. Please contact us online. As well as welcome you call us : 0755-83957301.We will offer a right price; Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support !
由于批量與樣品的價格不同，網上無法統一注明，請您把采購型號通過郵件或客服QQ2850151584發給我們，也可致電明佳達國內銷售部：0755-83957301，由客服人員為您報價；有時元件廠商價格稍許變動，本公司未能及時調整，如您覺得售價偏高，請與我們說明并適當議價；感謝支持!
