( V ) Preliminary Specifications 

( ) Final Specifications 

 

Module : 13.3” WXGA Color TFT-LCD 

Note : LED Backlight without driving circuit design

 

 

 

1. Handling Precautions 

 

1) Since front polarizer is easily damaged, pay attention not to scratch it. 

2) Be sure to turn off power supply when inserting or disconnecting from input 

connector. 

3) Wipe off water drop immediately. Long contact with water may cause 

discoloration or spots. 

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft 

cloth. 

5) Since the panel is made of glass, it may break or crack if dropped or bumped on 

hard surface. 

6) Since CMOS LSI is used in this module, take care of static electricity and insure 

human earth when handling. 

7) Do not open nor modify the Module Assembly. 

8) Do not press the reflector sheet at the back of the module to any directions. 

9) At the insertion or removal of the Signal Interface Connector, be sure not to 

rotate nor tilt the Interface Connector of the TFT Module. 

11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for 

example), do not twist nor bend the TFT Module even momentary. At designing 

the enclosure, it should be taken into consideration that no bending/twisting 

forces are applied to the TFT Module from outside. Otherwise the TFT Module 

may be damaged. 

12) Small amount of materials having no flammability grade is used in the LCD module. 

The LCD module should be supplied by power complied with requirements of Limited 

Power Source (IEC60950 or UL1950), or be applied exemption. 

13) Disconnecting power supply before handling LCD modules, it can prevent electric 

shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of 

TFT module that a LED light bar build in as a light source of back light unit. It can 

prevent electrostic breakdown

 

 

 

Because of wholesale price is different from sample price, our website can not state.  Please send your required part number via email to Sales@hkmjd.com or add our skype id mjdccm898 for online talking. As well as welcome you call us : 0755-83957301  We will send offer for you;  Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support ！

 

 

 

批發與零售價位不同,無法一一明示,詳情請通過郵件或客服咨詢(國內銷售部電話:0755-83957301,企業QQ: 2850151585), 由于電子元器件價格不穩定,時常有稍許變動,本公司未能及時調整,如您覺得售價不適，請與我們說明并適當議價,謝謝支持。