UPD16835A
MONOLITHIC QUAD H BRIDGE DRIVER CIRCUIT
DESCRIPTION
The µPD16835A is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET
output circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional
driver ICs that use bipolar transistors.
Because the µPD16835A controls a motor by inputting serial data, its package has been shrunk and the number
of pins reduced. As a result, the performance of the application set can be improved and the size of the set has been
reduced.
The µPD16835A employs a current-controlled 64-step micro step driving method that drives stepper motor with
low vibration.
The µPD16835A is housed in a 38-pin plastic shrink SOP to contribute to the miniaturization of the application set.
The µPD16835A can simultaneously drive two stepper motors and is ideal for the mechanisms of camcorders.
FEATURES
Four H bridge circuits employing power MOS FETs
Current-controlled 64-step micro step driving
Motor control by serial data (8 bytes x 8 bits) (original oscillation: 4-MHz input)
Data is input with the LSB first.
EVR reference setting voltage: 100 to 250 mV (@VREF = 250 mV) ... 4-bit data input (10-mV step)
Chopping frequency: 32 to 124 kHz ... 5-bit data input (4-kHz step)
Original oscillation division or internal oscillation selectable
Number of pulses in 1 VD: 0 to 252 pulses ... 6 bits + 2-bit data input (4 pulses/step)
Step cycle: 0.25 to 8191.75 µs ... 15-bit data input (0.25- µs step)
3-V power supply. Minimum operating voltage: 2.7 V (MIN.)
Low current consumption IDD: 3.0 mA (MAX.), IDD (RESET): 100 µA (MAX.), IMO(RESET): 1.0 µA (MAX.)
38-pin plastic shrink SOP (7.62 mm (300))
Because of wholesale price is different from sample price, our website can not state.Please send your required part number via email to Sales@hkmjd.com or add our skype id mjdccm898 for online talking.As well as welcome you call us : 0755-83957301 We will send offer for you; Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support !
批發與零售價位不同,無法一一明示,詳情請通過郵件或客服咨詢(國內銷售部電話:0755-83957301,企業QQ: 2850151585), 由于電子元器件價格不穩定,時常有稍許變動,本公司未能及時調整,如您覺得售價不適,請與我們說明并適當議價,謝謝支持。